UV DTF TRANSFER PRINTING IN LONG ISLAND, NY • NEW YORK
UV DTF stickers have advanced adhesive, easy peel and press application, vibrant colors, very durable, water/UV resistant and stick on many surfaces.
Discover exceptional Direct to film (DTF) printing services in New York. Specializing in DTF and UV DTF transfers and gang sheets with reliable service.
UV DTF (Direct to Film) printing by Allin1graphics.com
UV DTF (Direct to Film) transfers are high-quality, full-color designs printed on a film using UV-curing technology, making them durable and easy to apply to hard or irregular surfaces like glass, metal, and plastic without a heat press. To apply them, you clean the surface, peel the backing, position the transfer, and firmly rub it down before peeling off the transfer film
The latest in UV DTF technology unlocks your ability to offer 1000s of customized products. Popular for use on mugs, coasters, awards and much much more. These DTF printed decals are vibrant and durable with excellent adhesion. Peel and stick application is done in no time at all. Ink creates textured raised surface compared to dye sublimated products. Submit a gang sheet of designs for maximum savings. Product includes CMYK + White printing so a PNG file with a transparent background is required, 300ppi is recommended for the highest quality results. The DTF decals can be installed via wet application for easy placement and temporary repositioning.
Spec
UV DTF Film with white carrier sheet
5/0 (CMYK + White Ink)
Instant Adhesion
Print Size Maximum: 22.5" x 120"
File Instructions
We only accept PNG files for this product. Artwork should be submitted with transparent backgrounds.
PNG Only
File must be transparent background
Require ⅛” safety margin along all edges to avoid print cut off in trimming
Gang up designs on your artboard to utilize the square footage price (e.g. repeat the same design on the artboard to maximize cost)
5/0 color printing
Max size 22” x 120”
Transfers will be trimmed to ordered size
Pressing Instructions
Prep the application area - Clean using soap and water (recommended), if using 50/50 alcohol and water mix thoroughly remove cleanser or adhesion might be affected.
Squeegee - After cutting out your design from your sheet, place your design adhesive side up and run a soft squeegee over the print, this will secure your print to the film and will be easier to pull off the carrier sheet without issue.
Peel the carrier sheet - Carefully detach the white carrier sheet from the white adhesive side. Taking care that small elements and lines all stay attached to the film and the carrier sheet comes away clean.
Place sticker on item - Small graphics maybe applied all at once using both hands to place, please line up accurately as the adhesive is very aggressive. Large graphics might be best applied via a hinge method similar to adhesive vinyl exposing a small portion of the adhesive to tack and hinge the application, once properly aligned the rest of the carrier sheet can be removed.
Complete transfer - With the film still in place firmly squeegee or burnish the design onto the item making sure to get the entire print secured. Start peeling the film watching closely for any areas that might not release from the film and lifting from the item. If areas are lifting stop peeling, and squeegee again until adhered, squeegee from multiple angles for best adhesion.
Wet application - UV decals can be applied using a wet application. Use application fluid or water with a few drops of dish soap. This process can be more forgiving than dry installations as the adhesion of these decals is permanent and trying to lift a misplaced decal will likely result in tearing.
